0
Basket is empty
0

    Bambu Lab PLA Aero, Šedá s cívkou, 1,75mm, 1kg, (Gray)

    Bambu Lab PLA Aero, Šedá s cívkou, 1,75mm, 1kg, (Gray)
     
    Producer
    BambuLab
    Code
     PLBPLAA17SE 
    Your price exc. VAT
    41.77 EUR
    VAT
    21%
    Your price inc. VAT
    50.55 EUR
    Price guarantee
    Find better price on net?  Inform us!
    Warranty
    24 Month
    Prodejna s DPH
    50.55  EUR

      Product details

      Bambu PLA Aero

      Bambu PLA Aero achieves low density and light weight by foaming at high temperatures during printing and creating small holes inside the prints. It's the perfect choice for light-weight and energy-saving prints, including unmanned aerial vehicles (UAVs), aerodynamic models, and gliders.

       

      Foaming PLA materials (PLA Aero) have high requirements for material drying and parameter settings. Please carefully read Instructions for printing aircraft model with foaming PLA (PLA Aero) before starting the printing process.

      PLA Aero
       

       

      Low Density and Light Weight

      Bambu PLA Aero has almost the same filament density as regular PLA, while the prints density is only 50% to 80%.

       
      PLA Aero rfid

      * When printing models of the same volume, PLA Aero is about half the weight of PLA Basic.

       

      Controllable Model Density

      Achieve lower density of the prints by increasing printing temperature and lowering flow rate.

      rfid
       

      * The average density of prints will vary with changes in parameters such as actual printing temperature, flow rate ratio, printing speed, model size, wall thickness and infill density.

       
        Parameter Setting Average Density
      Printing Temperature Increases ? Decreases ?
      Printing Speed Increases ? Stable or Increases ?
      Flow Rate Ratio Increases ? Increases ?
      Model Size Increases ? Decreases ?
      Wall Thickness(Wall loops) Increases ? Increases ?
      Infill Density Increases ? Increases ?

      The relationship between the maximum foaming rate, minimum print density, and printing temperature of PLA Aero.

      Printing Temperature
      Minimum Flow Rate Ratio
      Maximum Volumetric Expansion Ratio
      Maximum Foaming Rate
      Minimum Prints Density
      190 °C ~ 0.95 ~ 100% ~ 0% ~ 1.17 g/cm³
      200 °C 0.89 110% 10% 1.06 g/cm³
      210 °C 0.85 115% 15% 1.02 g/cm³
      220 °C 0.76 129% 29% 0.91 g/cm³
      230 °C 0.62 158% 58% 0.74 g/cm³
      240 °C 0.45 217% 117% 0.54 g/cm³
      250 °C 0.38 258% 158% 0.45 g/cm³
      260 °C 0.35 280% 180% 0.42 g/cm³
      270 °C 0.37 265% 165% 0.44 g/cm³

      Specimen Test: Nozzle Type: 0.4 mm; Printing Speed: 80 mm/s; Model size (L*W*H): 80*10*4 mm³ (the XY direction)

      The actual required flow rate ratio and final model density may vary with different models.

       

      Tough with Good Impact Resistance

      Compared to pre-foaming Wood PLA, Bambu PLA Aero and its prints are tougher and more resistant to impact, collision, and falling.

       

       

       

       

       

      Matte Finish For Easy Coloring

      Bambu PLA Aero provides an easy-to-color matte surface texture with better dyeing results as compared to PLA Basic.

      rfid
       

      Parameters Comparison

      Learn more different filaments comparison on Bambu Filament Guide >>

        PLA Basic PLA Aero
      Printing Temperature 190 - 230 ? 220 - 260 ?
      Printing Speed < 300 mm/s < 180 mm/s
      Flow Rate Ratio 0.96 - 1 0.5 - 0.8
      Filament Density 1.24 g/cm³ 1.21 g/cm³
      Foaming Rate / 0 - 120%
      Prints Density 1.21 g/cm³ 0.55 - 1.05 g/cm³

       

      Accessory Compatibility

        Recommended Not Recommended
      Build Plate Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate /
      Hotend Hotend with Hardened Steel Nozzle 0.4 mm
      Hotend with Stainless Steel Nozzle 0.4 mm
      Hotend with Hardened Steel Nozzle 0.6 mm / 0.8 mm
      Hotend with Stainless Steel Nozzle 0.2 mm
      Glue Bambu Liquid Glue
      Glue Stick
      /
       

      RFID for Intelligent Printing

      All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

      Load and print! No more tedious setting steps.

      rfid
       
      Recommended Printing Settings
      Drying Settings (Blast Drying Oven) 55 °C,8 h
      Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
      Nozzle Temperature 220 - 260 °C
      Bed Temperature (with Glue) 35 - 45 °C
      Printing Speed < 180 mm/s
      Physical Properties  
      Density 1.21 g/cm³
      Vicat Softening Temperature 54 °C
      Heat Deflection Temperature 53 °C
      Melting Temperature 153 °C
      Melt Index 7.7 ± 0.6 g/10 min
      Mechanical Properties  
      Tensile Strength 24 ± 2 MPa
      Breaking Elongation Rate 2.6 ± 0.7 %
      Bending Modulus 1690 ± 120 MPa
      Bending Strength 45 ± 4 MPa
      Impact Strength 28.8 ± 1.3 kJ/m²

       


      Product manager:

      Milan Záhorský,  233 320 590,  602 215 334,  zahorsky@nc.cz

      Producer's websites:

      https://www.bambulab.com/

      Send info

      Enquiry to product

      Your e-mail
      Enquiry

      Find better price on net?

      Your e-mail
      Price exc. VAT
      Price inc. VAT
      WWW
      Comment
      I'm interested in this product

      Send info about this product to friend

      Your e-mail
      Send to e-mail
      Comment

      Did you find an error?

      Fault description
      Your e-mail

      Discussion (0)